Ms01 Firmware Upgrade Guide

Ms01 Firmware Upgrade Guide

Dear users,
Thank you for choosing our product! To help you successfully complete the firmware upgrade for Selfie Monitor Screen MS01, we have prepared this detailed guide. Please read through the instructions carefully and follow the steps below to ensure a smooth upgrade process.

Preparation Before Upgrading

Before starting the firmware upgrade, please make sure you have the following items ready:

1. Selfie Monitor Screen MS01 device;
2. A USB-C cable with data transfer functionality;
3. A computer running Windows 10 or a later version.

Upgrade Steps

Step 1: Download and Extract the Firmware Upgrade Folder

• Download the firmware upgrade folder from the official source 👉 [Link] and save it to your computer.
• Extract the contents of the downloaded folder and place them in a location on your computer.
  

Step 2: Connect the Device to Your Computer

• Power off your Selfie Monitor Screen MS01 completely.
• Use the USB-C cable to connect the device to your computer. Ensure the cable supports data transfer (not just charging).

Step 3: Launch the Upgrade Tool

• Navigate to the extracted firmware folder.
• Locate and open the file named "HCProgrammer.exe" . This will launch the firmware upgrade tool.

Step 4: Select the Firmware File

• In the upgrade tool window, find the option labeled "Firmware select" .
• Click on it and browse to the extracted firmware folder. Select the file with a .bin extension.

Step 5: Start the Upgrade Process

• Check the Device Status in the tool window to ensure it displays "Connected" .
• Once confirmed, click the "Start" button to begin the firmware upgrade.

Step 6: Complete the Upgrade

• Wait approximately 20 seconds for the upgrade process to finish.
• When the Progress bar shows 100% , the upgrade is complete.
  

Congratulations!

You have successfully upgraded the firmware for your Ms01 device.

• Disconnect the device from the computer and press the power button for 20 seconds to restart the device. After this, your Ms01 will be ready for normal use.

 Enjoy the enhanced performance and features!

If you encounter any issues during the upgrade process, please feel free to contact our customer support team for assistance, mail to hi@fotorgear.com. We’re always here to help!